All-in-One Desktop Circuit Printer, Paste Dispenser and Pick and Place. With Squink, print and assemble prototype PCBs in minutes for less than a cup of coffee.

Supply package with inks and substrates to print multilayered circuits!

Upgrade your Squink Basic PCB Printer to print multilayered circuits!

Bundle of 6 glue pouches (4-6 working hours per pouch)

A cartridge of Advanced Conductive Ink. It contains enough ink to print around 25 layers of size 3.5" x 3.5".
Shelf life: 6 months (refrigerated at 4°C).
Warning: once unboxed, the contacts on the cartridge will corrode in less than 10 days unless it is properly taped and refrigerated.

The perfect accessory for your Squink. Add plated through-holes to your 3D Printed PCBs with the Rivet Press and cut the print out of your sheet of FR4 with the 12" Shears. This set includes one PCB rivet Toolpress, Shears, 1 mm (40 mil) rivets and matching toolhead which is the ideal size for placing most pin headers and connectors. Custom rivet and tool sizes are available upon request.

These shears are ideal for cutting FR4 and Kapton substrates after printing and assembly, or cutting larger pieces down to the appropriate size before printing. The 8" Shear has a cutting capacity of 305mm, with a cutting bed 225mm wide, although wider material can be cut.

These copper PCB rivets line the inside of a drillhole just like any plated through-hole. Compatible with the BotFactory Rivet Toolpress and matching Toolhead

A cartridge of Insulating Ink. It contains enough ink to print around twenty-five 3.5" x 3.5" dual-layered circuits.Shelf life: 6 months (keep at ROOM TEMPERATURE)

This toolhead works with the Rivet Tool-press and 0.6 mm (24 mil) rivets.

This toolhead works with the Rivet Tool-press and 2.6 mm (102 mil) rivets.

These copper PCB rivets line the inside of a drillhole just like any plated through-hole. Compatible with the BotFactory Rivet Toolpress and matching Toolhead.

This toolhead works with the Rivet Tool-press and 0.8 mm (30 mil) rivets.

These copper PCB rivets line the inside of a drillhole just like any plated through-hole. Compatible with the BotFactory Rivet Toolpress and matching Toolhead

These shears are ideal for cutting FR4 and Kapton substrates after printing and assembly, or cutting larger pieces down to the appropriate size before printing. The 12" Shear has a cutting capacity of 305mm, with a cutting bed 225mm wide, although wider material can be cut.

This toolhead works with the Rivet Tool-press and 1.2 mm (47 mil) rivets.

Need to solder to your traces? Need to place Through-hole components or connectors? Place and compress copper rivets to each trace with this toolpress, adding even more functionality to your Squink PCB Printer. Like plated through-holes, the rivets line the inside of a drill-hole. Includes one PCB Rivet Toolpress, one 40 mil (1 mm) toolhead and matching PCB rivets. Keep in mind that no drill-press is included - you must provide your own.

This toolhead works with the Rivet Tool-press and 1 mm (40 mil) rivets.